Mitsubishi Electric Melsec A Series - Other Precautions

6 - 24
REPLACEMENT OF CC-LINK
6
This section describes other precautions.
(1) Peripheral device connection module
When AJ65BT-G4 type peripheral connection module is used on the A/AnS/QnA/QnAS series, replace it
with AJ65BT-G4-S3 type peripheral connection module.
AJ65BT-G4 type peripheral connection module cannot be used on the Q series.
(2) Processing time
The link scan time and link refresh time differ between the A/AnS/QnA/QnAS series and the Q series.
For details on processing times, refer to the manual for the respective module.
(3) Parameter registration to E
2
PROM
As the Q series CC-Link system master/local module does not have E
2
PROM, delete the sequence
program of the section corresponding to the parameter registration to E
2
PROM.
On the Q series CC-Link system master/local module, set the GX Works2 or GX Developer network
parameters to register parameters to the programmable controller CPU.
6.7 Other Precautions