EasyManua.ls Logo

Mitsubishi Electric MELSEC FX Series - Page 46

Mitsubishi Electric MELSEC FX Series
838 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 Instruction List
2.3 Applied Instructions
44
FXCPU Structured Programming Manual
(Basic & Applied Instruction)
*1. The instruction is provided in the FXU PLC Ver. 2.30 or later.
*2. The instruction is provided in the FX
U PLC Ver. 3.07 or later.
*3. The 32-bit operations are provided in the FX
3U and FX3UC PLCs Ver. 2.20 or later.
*4. The instruction is provided in the FX
U PLC Ver. 2.10 or later.
*5. The instruction is provided in the FX
0N PLC Ver. 1.20 or later.
*6. Though programmed, this instruction is not valid because the FX
1NC or FX2NC PLC does not have a
volume to read out under this instruction.
*7. The instruction is provided in the FX
U and FX2C PLCs Ver. 3.30 or later.
*8. The instruction is not provided in the FX
U and FX2C PLCs Ver. 3.30 or later.
*9. The instruction is provided in the FX
3UC PLC Ver. 2.20 or later.
*10. The instruction is provided in the FX2N and FX2NC PLCs Ver. 3.00 or later.
*11. The instruction is provided in the FX
3UC PLC Ver. 1.30 or later.
*12. The instruction is provided in the FX
3G PLC Ver. 1.10 or later.
*13. The instruction is provided in the FX
3U and FX3UC PLCs Ver. 2.61 or later.
The FX
3UC-32MT-LT-2 PLC is due to be upgraded later.
Instruction name
Execution
condition
Function
Applicable PLCs
Reference
FX3U(C)
FX3G
FX2N(C)
FX1N(C)
FX1S
FXU/FX2C
FX0N
FX0(S)
Data Comparison
OR= Continuous
OR compare
33333
Section 7.22.3
OR> Continuous 33333
OR< Continuous 33333
OR<> Continuous 33333
OR<= Continuous 33333
OR>= Continuous 33333
ORD= Continuous 33333
ORD> Continuous 33333
ORD< Continuous 33333
ORD<> Continuous 33333
ORD<= Continuous 33333
ORD>= Continuous 33333
Data Table Operation
LIMIT Continuous
Limit control
3
Section 7.23.1
LIMITP Pulse 3
DLIMIT Continuous 3
DLIMITP Pulse 3
BAND Continuous
Dead band control
3
Section 7.23.2
BANDP Pulse 3
DBAND Continuous 3
DBANDP Pulse 3
ZONE Continuous
Zone control
3
Section 7.23.3
ZONEP Pulse 3
DZONE Continuous 3
DZONEP Pulse 3
SCL Continuous
Scaling
(coordinate by point data)
3
Section 7.23.4
SCLP Pulse 3
DSCL Continuous 3
DSCLP Pulse 3

Table of Contents

Other manuals for Mitsubishi Electric MELSEC FX Series

Related product manuals