A-13
2 Description of Analog Products
2.2 List of Analog Product Models
A
Common Items
B
FX
3U
-4AD
FX
3UC
-4AD
C
FX
3U
-4AD-ADP
D
FX
3G
-2AD-BD
E
FX
3U
-4DA
F
FX
3U
-4DA-ADP
G
FX
3G
-1DA-BD
H
FX
3U
-3A-ADP
I
FX
3U
-4AD-PT
-ADP
J
FX
3U
-4AD-PTW
-ADP
FX
3S
/FX
3G
/FX
3GC
/FX
3U
/FX
3UC
PLC User's Manual - Analog Control Edition
Common Items
Voltage/current input/output mixture
FX
2N-5A
*1
Input
4ch
Voltage:
-10 V to +10 V DC
0.32 mV
(with sign, 16 bits)
Combined use of voltage and
current is possible.
The offset/gain can be
adjusted.
*3
The scaling function is
incorporated.
*2
Current:
-20 mA to +20 mA DC
1.25 μA
(with sign, 15 bits)
Output
1ch
Voltage:
-10 V to +10 V DC
5 mV
(with sign, 12 bits)
Current:
0 mA to 20 mA DC
20 μA
(10 bits)
FX
0N-3A
*4 *5
Input
2ch
Voltage:
0 V to 10 V DC
40 mV
(8 bits)
The input format is common to 2
channels.
The offset/gain can be adjusted.
(Common to 2 input channels)
*2
Current:
4 mA to 20 mA DC
64 μA
(8 bits)
Output
1ch
Voltage:
0 V to 10 V DC
40 mV
(8 bits)
Current:
4 mA to 20 mA DC
64 μA
(8 bits)
Temperature sensor input
FX
2N-8AD
*1
8ch
Type K:
-100 °C to +1200 °C
0.1 °C
Combined use of voltage,
current, and thermocouple is
possible.
Compatible with thermocouple
types K, J, and T.
The unit can be switched between
"Centigrade" and "Fahrenheit."
The sampling function is
incorporated.
*2
Type J:
-100 °C to +600 °C
Type T:
-100 °C to +350 °C
FX
2N-4AD-TC
*1
4ch
Type K:
-100 °C to +1200 °C
0.4 °C
Compatible with thermocouple
types K and J.
The unit can be switched between
"Centigrade" and "Fahrenheit."
*2
Type J:
-100 °C to +600 °C
0.3 °C
FX
2N-4AD-PT
*1
4ch
Pt100:
-100 °C to +600 °C
0.2 °C to 0.3 °C
Compatible with the platinum
resistance thermometer sensor
(Pt100 or JPt100).
The unit can be switched between
"Centigrade" and "Fahrenheit."
*2
FX
3U-4LC
*1
4ch
Example:
Type K:
-100 °C to +1300 °C
Example:
Pt100:
-200 °C to +600 °C
0.1 °C or 1 °C
(Depends on the
sensor input range.)
Compatible with thermocouple
types K, J, R, S, E, T, B, N, PL II,
W5Re/W26Re, U, and L.
Compatible with the platinum
resistance thermometer sensor
(Pt1000, Pt100, and JPt100).
The unit can be switched between
"Centigrade" and "Fahrenheit."
Compatible with the micro
voltage input.
The temperature adjustment
function (PID operation, etc.) is
incorporated.
The peak disconnection
detection function is
incorporated.
(A CT sensor is needed.)
*2
*1. To connect this block to the FX3GC/FX3UC Series PLC, either the FX2NC-CNV-IF or FX3UC-1PS-5V is
required.
*2. Refer to the instruction manual of the respective product.
*3. The offset and gain of the FX
2N-5A cannot be adjusted for channels using the analog value direct
indication mode or analog value mV (or
μA) specification mode.
*4. The FX
0N-3A cannot be connected to the FX3G/FX3GC Series PLC.
*5. To connect this block to the FX
3UC Series PLC, either the FX2NC-CNV-IF or FX3UC-1PS-5V is required.
Type
No. of
channels
Range Resolution Function
Refer-
ence
To Next Page
Loading...
