Mitsubishi Electric MELSEC iQ-F Series - Ethernet Performance Specifications

2 SERVO AMPLIFIER SETTING
2.4 Parameter Settings
16
2
2.4 Parameter Settings
1. Select [Parameter]  [Parameter Setting].
2. Set each item from [List display]. Set the same value for both axis 1 and axis 2.
 When "Basic" is selected
List display No. Name Setting value
Basic PA01 Operation mode 00003000h
PA04 Function selection A-1 00002100h
PA06 Electronic gear - Numerator 500
PA07 Electronic gear -Denominator 1
I/O PD01 Input signal automatic ON selection 1 00000C00h
PD13 Function selection D-2 00000100h
Positioning control PT45 Homing method -3
Network PN13 Network protocol setting 00000004h
PN22 Function selection N-5 00000000h