Mitsubishi Electric MELSEC iQ-F Series - Page 34

33
3 PROGRAMMABLE CONTROLLER SETTINGS
3.6 Adding Structures and Global Labels
To set Data Type, click [...] and follow the step in the figures below.
*1 Any desired data name can be set.
*2 Set the specified label names. (fixed)
*3 This field can be set when "Array" is selected.
Addition of global labels 2
1. Select [Label]  [Global Label]  [Global]. Double-click [Global] and set the label as follows. For how to input the label
name, class, and comment (English), refer to Page 30 Addition of global labels 1.
Label Name Data Type Element (1 dimension)
*3
Element (2 dimensions)
*3
bnRX, bnRY Bit 128 0
unRWr, unRWw Word [Unsigned]/Bit String [16-bit] 64 0
Label Name
*1
Data Type
*2
Class
*3
English
G_stLinkIEF stRemoteReg VAR_GLOBAL Link device
[bnRX, bnRY] [unRWr, unRWw]
Select it. Select it.
Double-click
Click
Click [Detailed Display].
*4
Click