Mitsubishi Electric MELSEC iQ-F Series - Device Comments

5 CREATING PROGRAMS
5.4 Device Comments
44
5
5.4 Device Comments
Set device comments to use for the programs.
In the "Navigation" window, select [Device]  [Device Comment]  [Common Device Comment]. Double-click [Common
Device Comment] and set the comments as shown below.
*1 Input X0 here when the devices of X0 and later are not displayed on the screen.
Device Name English
X0 Servo ON command
X1 OPR execution
X2 30000 pulses setting
X3 -30000 pulses setting
X4 20r/min setting
X5 40r/min setting
X6 Relative positioning execution
X10 Servo ON command
X11 OPR execution
X12 30000 pulses setting
X13 -30000 pulses setting
X14 20r/min setting
X15 40r/min setting
X16 Relative positioning execution
Input X0.
*1
Double-click