Mitsubishi Electric MELSEC iQ-F Series - Page 121

APPX
Appendix 5 Conversion of the SFC Program
119
A
Precautions
When projects are converted, the program instructions and devices may be changed. Check the contents of the project.
Parameters other than the network parameter of CC-Link
*1
will be deleted. Set the parameters if necessary.
*1 For the network parameter of CC-Link, refer to Page 120 Precautions when Replacing the Parameters.
6. Set the model name of the CPU for the system parameter.
[System Parameter]  [I/O Assignment Setting]  Model Name
7. Perform conversion.
[Convert]  [Rebuild All]
Set the model name of the CPU.