28
2 Replacement from FX3G to FX5S
2.4 Conversion of the Projects
5. Check the contents of the model change result in the “Output window”.
• When projects are converted, the program instructions and devices may be changed. Check the contents of the project.
Parameters other than the CC-Link network parameters
*1
will be deleted. Set the parameters if necessary.
*1 For details on CC-Link network parameters, refer to Page 29 Precautions when Replacing the Parameters.
6. Set the model name of the CPU for the system parameter.
[System Parameter] [I/O Assignment Setting] Model Name
7. Perform conversion.
[Convert] [Rebuild All]
Set the model name of the CPU.
To Next Page
Loading...
