Mitsubishi Electric MELSEC iQ-F Series - Overview of CC-Link IE TSN

2 HIGH-SPEED COUNTER MODULE FB
2.1 M+FX5-2HC_CountEnable (Count Enable Operation)
11
2
Timing chart of I/O signals
■Normal completion
■Error completion
Precautions
• If a module error occurs after normal completion, this FB does not output error completion or module error. To check for
module errors, use M+FX5-2HC_ErrorOperation (Error operation). (Page 28 M+FX5-2HC_ErrorOperation (Error
Operation))
0
i_bEN
o_bENO
o_bOK
o_bCountStart
o_bErr
o_uErrId
OFF
(Execution command)
(Execution status)
CH1 count permit command
Un\G4.0
(Normal completion)
(Count in operation flag)
(Error completion)
(Error code)
CH1 in operation
Un\G28.1
00
i_bEN
o_bENO
o_bOK
o_bCountStart
o_bErr
o_uErrId
OFF
OFF
OFF
OFF
(Execution command)
(Execution status)
CH1 count permit command
Un\G4.0
(Normal completion)
(Count in operation flag)
(Error completion)
(Error code)
Error code
CH1 in operation
Un\G28.1