Mitsubishi Electric MELSEC iQ-F Series - Chapter 2 Preparation; System Configuration

9
2 PREPARATION
2.1 System Configuration
2 PREPARATION
This manual describes a configuration example in which an FX5-ENET is connected to an FX5U CPU module and is
connected to AWS via a router.
To use applicable CPU modules other than the FX5U CPU module, refer to the following manuals.
MELSEC iQ-F FX5S/FX5UJ/FX5U/FX5UC User's Manual (Hardware)
MELSEC iQ-F FX5 Ethernet Module User's Manual, Appendix 7 Added and Changed Functions
2.1 System Configuration
This section describes the system configuration in which one FX5-ENET is connected to one FX5U CPU module and is
connected to AWS via a router.
• Register an AWS account and prepare an IAM user in advance.
• Prepare an Internet line on which a port 8883 can be used.
Certificate Configuration
Tool for FX5-ENET
AWS
FX5U CPU module
Personal computer
Install GX Works3 in advance.
Ethernet
IP address: 192.168.3.13
Subnet mask: 255.255.255.0
Default gateway: 192.168.3.1
IP address: 192.168.3.12
Subnet mask: 255.255.255.0
Router
IP address: 192.168.3.1
FX5-ENET