EasyManua.ls Logo

Mitsubishi Electric MELSEC iQ-F Series - Required Products and Software; Wiring

Mitsubishi Electric MELSEC iQ-F Series
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 PREPARATION
2.2 Required Products and Software
10
2
2.2 Required Products and Software
*1 To obtain the latest version, please contact your local Mitsubishi Electric representative.
FB library
GX Works3 must import the following.
2.3 Wiring
For the power supply wiring of the FX5U CPU module, refer to the following.
MELSEC iQ-F FX5S/FX5UJ/FX5U/FX5UC User's Manual (Hardware), Section 13.4 Power Supply Wiring
One FX5U CPU module One FX5-ENET Personal computer and software
Use an FX5U CPU module that meets the following
conditions.
Serial number: 17X**** or later
Firmware version: 1.280 or later
Use an FX5-ENET that meets the following
conditions.
Serial number: 234**** or later
Firmware version: 1.200 or later
GX Works3
*1
Applicable software version: 1.095Z or later
Certificate Configuration Tool for FX5-ENET
*1
Applicable software version: 1.00A or later
Router Three Ethernet cables AWS account
Use the router for connecting the programmable
controller to AWS.
Use these cables for connecting the personal
computer and the FX5U CPU module, the personal
computer and the FX5-ENET, and the FX5-ENET
and the router.
Use an Ethernet cable compliant with the following
standards.
Category 5 or higher, straight cable (double
shielded/STP)
IEEE 802.3 (100BASE-TX)
ANSI/TIA/EIA-568-B (Category 5)
Register an AWS account and prepare an IAM user
in advance.
Name File name Reference
Character string operation FB library StrProcessing_F.mslm Page 53 FB Library
AWS

Other manuals for Mitsubishi Electric MELSEC iQ-F Series

Related product manuals