Mitsubishi Electric MELSEC iQ-F Series - Setting in the master station

9 PROGRAMMING
9.4 Communication Example Between the Master Station and Servo Amplifier
183
9
Setting in the master station
Connect the engineering tool to the FX5 CPU module on the master station and set the parameters.
1. Set the FX5 CPU module as follows.
[Project]  [New]
2. Click the [Setting Change] button to use the module label.
3. Set the FX5-CCLGN-MS as follows.
[Navigation window]  [Parameter]  [Module Information]  Right-click  [Add New Module]