EasyManua.ls Logo

Mitsubishi Electric MELSEC iQ-F Series - LED Indications

Mitsubishi Electric MELSEC iQ-F Series
318 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 SPECIFICATIONS
2.4 Performance Specifications of Ethernet
17
2
2.4 Performance Specifications of Ethernet
The following table lists the performance specifications of Ethernet for the FX5-CCLGN-MS.
*1 For maximum segment length (length between industrial switches), consult the manufacturers of the industrial switches used.
*2 Consult the manufacturers of the industrial switches used.
*3 In the case of one connection per device, up to eight devices can be connected.
*4 This setting can be used for the firmware version "1.010" or later.
The operation of commercial devices used for the following applications is not guaranteed. Check the
operation before using the module.
Internet (general public line) (Internet-access service offered by an Internet service provider or a
telecommunications carrier)
Firewall device(s)
Broadband router(s)
Wireless LAN
Item Description
Data transmission speed 1Gbps
100Mbps
*4
Communication mode 1000BASE-T Full-duplex
100BASE-TX
*4
Full-duplex
Interface RJ45 connector (Auto MDI/MDI-X)
Maximum frame size 1518 bytes
Jumbo frame Not available
Maximum segment length 100m (distance between an industrial switch and a station)
*1
Number of cascade connections
*2
IP version Compatible with IPv4
Number of simultaneous open
connections (maximum number
of connections)
Connection with MELSOFT products 8 connections
*3
Connection to SLMP-compatible
devices
8 connections
*3

Table of Contents

Other manuals for Mitsubishi Electric MELSEC iQ-F Series

Related product manuals