66
5 SYSTEM CONFIGURATION
5.1 Structure of CC-Link IE TSN Class B Devices and Ethernet Devices
5.1 Structure of CC-Link IE TSN Class B Devices and
Ethernet Devices
This section describes the system configuration when "Connection Device Information" under "Basic Settings" of the
engineering tool is set to "CC-Link IE TSN Class B Only".
For the maximum number of connectable stations when "Connection Device Information" under "Basic Settings" of the master
station is set to "CC-Link IE TSN Class B Only", check the following.
Page 15 Performance Specifications of CC-Link IE TSN
The availability of connection of network configuration devices varies depending on the communication mode and
communication speed.
•Unicast mode
Page 67 When the communication speed for the master station is set to 1Gbps
Page 68 When the communication speed for the master station is set to 100Mbps
• Multicast mode
Page 69 When the communication speed for the master station is set to 1Gbps
Page 70 When the communication speed for the master station is set to 100Mbps
The following terms are used to describe the terms in the tables referenced.
No.0: Master station
No.1, No.2, No.3, No.4, and No.5: Local station
No.6, No.7, No.8, No.9, No.10, and No.11: Remote station
(1), (2): Ethernet device
Class B: CC-Link IE TSN Class B device
No.0: Master station
No.1: Local station
No.2: Remote station
(1) Device on the master station side (The master station or a device near the
master station)
(2) Device on the end side (A device far from the master station)
No.0
Class B (1Gbps)
No.1
Class B (1Gbps)
No.4
Class B (1Gbps)
No.5
Class B (1Gbps)
No.2
Class B (1Gbps)
No.6
Class B (1Gbps)
(1)
(1Gbps)
(2)
(1Gbps)
No.7
Class B (1Gbps)
No.3
Class B (1Gbps)
No.10
Class B (1Gbps)
No.11
Class B (1Gbps)
No.8
Class B (100Mbps)
No.9
Class B
(100Mbps)
Industrial switch
(for CC-Link IE
TSN Class A)
Industrial switch
(for CC-Link IE
TSN Class B)
Industrial switch
(for CC-Link IE
TSN Class B)
No.0 No.1
No.2
(2)(1)
(2)(1)
To Next Page
Loading...
