Mitsubishi Electric MELSEC iQ-F Series - Structure with modules on CC-Link IE TSN only

5 SYSTEM CONFIGURATION
5.1 Structure of CC-Link IE TSN Class B Devices and Ethernet Devices
71
5
Structure with modules on CC-Link IE TSN only
Connection with modules on CC-Link IE TSN only
Line topology
The network is configured in a line topology. An industrial switch (for CC-Link IE TSN Class B) is not required.
When an error occurs in a device station, the stations connected after the faulty station will be disconnected.
Star topology
The network is configured in a star topology via an industrial switch (for CC-Link IE TSN Class B). This allows devices to be
added easily.
Even when an error occurs in a device station, a data link can be continued with the stations that are operating normally.
Coexistence of line and star topologies
Line and star topologies can be mixed in the same network configuration.
No.0: Master station
No.1, No.2: Local station
No.3, No.4: Remote station
No.0: Master station
No.1: Local station
No.2: Remote station
No.0: Master station
No.1, No.2: Local station
No.3, No.4: Remote station
No.0 No.1 No.2
No.3 No.4
No.0 No.1
No.2
Industrial switch (for CC-Link IE TSN Class B)
No.0
No.3
No.1 No.2
No.4
Industrial switch (for CC-Link IE TSN Class B)