APPX
Appendix 2 Event List
795
A
20100 Operation Info Error clear The error was cleared. Operation
source
information
Operation target
information
20200 Event history clear The event history was cleared.
20300 SD memory card
enabled
The SD memory card was enabled.
20301 SD memory card
forcibly disabled
The SD memory card forced disable
function was executed and the SD
memory card became ready to be
removed.
20400 Firmware update
succeeded
(RnCPU)
The firmware of the RnCPU was
successfully updated.
Firmware
update
information
(RnCPU)
20401 Firmware update
failed (RnCPU)
The firmware update of the RnCPU failed.
20420 Firmware update
succeeded
(RnENCPU)
The firmware of the RnENCPU was
successfully updated.
Firmware
update
information
(RnENCPU
(CPU part))
Firmware
update
information
(RnENCPU
(network part))
20421 Firmware update
failed (RnENCPU)
The firmware update of the RnENCPU
failed.
20500 CPU module data
backup succeeded
Data in the CPU module were
successfully backed up.
CPU module
data backup/
restoration
information
Target folder
information of
the CPU
module data
backup/
restoration
function
20501 CPU module data
backup failed
Backup of data in the CPU module failed.
20502 CPU module data
restoration
succeeded
Data were successfully restored to the
CPU module.
20503 CPU module data
restoration failed
Restoration of data to the CPU module
failed.
20510 CPU module data
backup setting
disabled
Backup function cannot be set CPU module
data backup
setting
information
20600 iQ Sensor Solution
data backup
succeeded
Data in the target device supporting iQ
Sensor Solution were successfully
backed up.
Information on
the execution
status of the
data backup/
restoration
function of iQ
Sensor Solution
Target device
information of
the data
backup/
restoration
function of iQ
Sensor Solution
20601 iQ Sensor Solution
data backup failed
Backup of data in the target device
supporting iQ Sensor Solution failed.
20602 iQ Sensor Solution
data restoration
succeeded
Data were successfully restored to the
target device supporting iQ Sensor
So
lution.
20603 iQ Sensor Solution
data restoration
failed
Restoration of data to the target device
supporting iQ Sensor Solution failed.
20610 iQ Sensor Solution
data backup start/
cancel/end
The data backup processing of the target
device supporting iQ Sensor Solution
started, canceled, or ended.
Data backup/
restoration
information of
iQ Sensor
Solution
20611 iQ Sensor Solution
data restoration
start/cancel/end
The data restoration processing of the
target device supporting iQ Sensor
Solution started, canceled, or ended.
20620 Right-to-use
acquisition/release
The right to use the data backup/
restoration function of iQ Sensor Solution
was acquired or released.
Information on
the right to use
the data
backup/
restoration
function of iQ
Sensor Solution
Event
code
Event
type
Event
category
Detected event Description Detailed information
Detailed
information 1
Detailed
information 2
Detailed
information 3
To Next Page
Loading...
