770
APPX
Appendix 1 Error Codes
41D7H File related error • The format information data of the specified drive (memory)
is abnormal.
• The file information data may be corrupted.
• Back up data in the CPU module, and then initialize the
memory.
41D8H File related error • The specified file is being accessed. • Execute again after a while.
41DFH File related error • The specified drive (memory) is write-protected. • Execute again after canceling the write protect of the
specified drive (memory).
41E0H File related error • The specified drive (memory) is abnormal or does not exist. • Check that an SD memory card is inserted, and execute the
function again.
• Back up data, and then initialize the memory.
41E1H File related error • Access to the SD memory card has failed. • Back up data, and then write the data to the data memory.
41E4H File related error • Access to the SD memory card has failed. • Execute the operation again after checking that the SD
memory card has been inserted.
• Execute the operation again after replacing the SD memory
card.
• Back up data, and then initialize the memory.
41E7H File related error • The format information data of the specified drive (memory)
is abnormal.
• The file information data may be corrupted.
• Back up data in the CPU module, and then initialize the
memory.
41E8H File related error • The format information data of the specified drive (memory)
is abnormal.
• The file information data may be corrupted.
• Back up data in the CPU module, and then initialize the
memory.
41E9H File related error • The specified file is being accessed. • Execute again after a while.
41EBH File related error • The file name is specified in a wrong method. • Execute again after checking the file name.
41ECH File related error • The file system of the specified drive (memory) is logically
corrupted.
• The file information data may be corrupted.
• Back up data in the CPU module, and then initialize the
memory.
41EDH File related error • The specified drive (memory) does not have continuous free
space. (The free space for file is sufficient but the continuous
free space is insufficient.)
• Execute again after deleting unnecessary files.
41EFH File related error • Creation of the power failure backup data in the specified
drive (memory) has failed.
• Execute the operation again after checking that the SD
memory card has been inserted.
41F0H File related error • The power failure backup data of the specified drive
(memory) are corrupted.
• Execute the operation again after checking that the SD
memory card has been inserted.
41F3H File related error • The file size is larger than the following:
• the value to be acquired when 2 bytes are subtracted from
4G bytes.
• Specify a smaller value for the file size when creating a file
or changing the file size. Alternatively, divide the file so that
each file size is smaller.
41F4H File related error • The request cannot be executed because the operation is
prohibited by the system.
• Do not request the file operation because it is prohibited by
the system.
41F5H File related error • The command for the (split storage) program was executed
to the file other than the (split storage) program file. Or, the
command not for the (split storage) program was executed
to the (split storage) program file.
• Check the command, and request the command applicable
to the target file.
41F8H File related error • The data is being accessed from another engineering tool. • Data are being written to the program memory or being
transferred to the backup memory.
Access the file after the currently-performed processing ends.
41FAH File related error • Program was written beyond the area where the program
can be executed.
• Execute again after reducing either the already written
program or newly written program.
41FBH File related error • The specified file is already being manipulated from the
engineering tool.
• Execute again after the currently performed operation is
completed.
41FCH File related error • An attempt was made to initialize the drive (memory) being
used.
• Stop all accesses to the specified drive (memory), and
execute the request again.
41FDH File related error • There are no data written to the data memory. • Write all the required files to the programmable controller.
41FEH File related error • The SD memory card has not been inserted.
• The SD memory card is being disabled.
• The SD memory card is being disabled by SM606 (SD
memory card forced disable instruction).
■When CPU Module Logging Configuration Tool is used
• The data logging was started when the CPU module is in the
following state: no SD memory card is inserted; the CARD
READY.LED is not on (green); or the SD memory card is
forcibly disabled.
• Insert the SD memory card.
• Remove the SD memory card, and insert it again.
• Cancel the SD memory card forced disable instruction.
41FFH File related error • The type of the SD memory card differs. • Check the type of the SD memory card.
Error
code
Error name Error details and cause Action
To Next Page
Loading...
