Mitsubishi Electric MELSEC iQ-R R60TD8-G - OPERATION EXAMPLES; 6.1 Programming Procedure

6 OPERATION EXAMPLES
6.1 Programming Procedure
31
6
6 OPERATION EXAMPLES
This chapter describes the programming procedure and the basic program of a temperature input module.
6.1 Programming Procedure
Take the following steps to create a program for running a temperature input module:
1. Set parameters.
Page 32 Parameter settings
2. Create a program.
Page 35 Program examples
6.2 Program Examples
System configuration
The following figure shows an example of the system configuration.
(1) Power supply module (R61P)
(2) CPU module (R120CPU)
(3) Temperature input module (R60TD8-G)
(4) Input module (RX10)
(1) (2) (3) (4)