Mitsubishi Electric MELSEC iQ-R R60TD8-G - Page 38

36
6 OPERATION EXAMPLES
6.2 Program Examples
■Program example 4
• This program is an example to perform the processing at the time of disconnection detection in CH7.
■Program example 5
• This program is an example to make the latest error code appear when disconnection is detected or an error has occurred.
After this, the program clears the disconnection detection flag, error flag, and stored error code.
(0) At the time when disconnection is detected in CH7, the processing is to be performed.
(0) Error manipulation start flag is to be turned on.