Mitsubishi Electric MELSEC iQ-R R60TD8-G - Page 40

38
7 OFFSET/GAIN SETTING
7.1 Setting Procedure
4. Check the channel where the offset/gain setting is
performed.
5. Write the temperature setting value corresponding to
the offset value to "Offset Temperature Setting Value".
6. Click [Offset Setting] button.
7. Apply a value that becomes an offset value to the
terminal of the corresponding channel, and click [Yes]
button.
8. Check that "Offset Status" has changed to "Changed".
9. Write the temperature setting value corresponding to
the gain value to "Gain Temperature Setting Value".
10. Click [Gain Setting] button.
11. Apply a value that becomes a gain value to the terminal
of the corresponding channel, and click [Yes] button.
12. Check that "Gain Status" has changed to "Changed",
and click [Close] button.