13 SERIAL COMMUNICATION MODULE DEDICATED COMMANDS
13.5 Programmable controller CPU monitoring function
271
13
■Word device registration, bit device registration
Specify the monitoring target device for multiple blocks with the consecutive word devices and bit devices treated as one
block.
Specify the following items for every block.
• Monitoring start device: Specify the device code and device number. (Page 67 Devices)
• Number of registered points: Specify the device points from the start device in word units. (Page 72 Number of device
points)
• Monitoring condition: Specify the monitoring condition and transmission method for the device to be registered. (Page
267 Monitoring condition)
• Monitoring condition value: Specify a value to judge the conditions have been matched or ON/OFF state of the bit.
(Page 268 Monitoring condition value)
Monitoring
start device
Number of
registered points
Monitoring
condition
Monitoring
condition value
Block (1 point)
To Next Page
Loading...
