Mitsubishi Electric MELSEC iQ-R Series - Page 312

310
15 QnACPU DEDICATED COMMANDS
15.3 File Control
Communication example
Read the file information table without header statement in following conditions.
• Drive name: 1 (RAM area of memory card A)
• File No.: 10
• Number of requested file: 2
■Data communication in ASCII code
(Request data)
(Response data)
■Data communication in binary code
(Request data)
(Response data)
Subcommand Keyword Setting flag Drive name File No. Number of requested files
Total number of
registered files
Number of file
information
File information 1 (Information of file No. 10)
File No. File name
Extension Attribute Time of last update Date of last update
File size
(20 hours 50 minutes 58 seconds)
(January 8, 1996)
File information 2 (Information of file No. 11)
File size
File No. File name
Extension Attribute Time of last update Date of last update
(11 hours 30 minutes 00 seconds) (December 2, 1996)
Setting
flag
File No.
Keyword Drive name
Number of
requested files
Subcommand
File information 1 (Information of file No. 10)
Number of file
information
Total number of
registered files
File sizeLast edit time
File No. File name Extension Attribute Last edit date
(20 hours 50 minutes 58 seconds) (January 8, 1996)
File information 2 (Information of file No. 11) File sizeLast edit time
File name Extension Attribute Last edit dateFile No.
(11 hours 30 minutes 00 seconds) (December 2, 1996)