Mitsubishi Electric MELSEC iQ-R Series - Page 433

18 COMMUNICATING USING 1E FRAMES
18.5 Read and Write Extended File Register
431
18
Communication example
Write data to the extended file registers directly in the CPU module with E71 mounted under the following conditions.
• Block number: No.0
• Device number: R100
• Number of device points: 3 points
■Data communication in ASCII code
(Request data)
■Data communication in binary code
(Request data)
35 H 32 H 32 H
30 H
30 H 30 H 30 H
30 H
30 H 30 H 36 H 34 H 33 H 30 H 30 H 30 H
31 H 30 H 39 H 30 H 38 H 39 H 36 H 37 H 32 H 31 H 34 H 33 H
5220 000000 64
0300
010998 76 1234
Data for the number of specified device points
Device number Number of device points
(R100 in No.0) (R101 in No.0) (R102 in No.0)
03 H 00 H
64 H 00 H 00 H 00 H
20 H
52 H
09 H 01 H 76 H 98 H 34 H 12 H
Number of
device points
Data for the number of
specified device points
Device number
(R100 in No.0) (R102 in No.0)
(R101 in No.0)