Mitsubishi Electric MELSEC iQ-R Series - Page 119

2 CPU MODULE INSTRUCTIONS
2.3 Application Instructions
117
2
■Reading the module model name
■Reading module specific information
Routing information instructions
■Reading routing information
■Registering routing information
Logging instructions
■Setting/resetting trigger logging
Program control instructions
■Changing the program execution type to standby type
■Changing the program execution type to standby type (output off)
■Changing the program execution type to scan execution type
Instruction symbol Processing details Reference
TYPERD Reads the module model name mounted on the slot specified by (H), and stores the model name in
the device areas specified by (d) and later.
Page 1063
TYPERD(P)
TYPERDP
Instruction symbol Processing details Reference
UNIINFRD Reads the module information by the number of points specified by (n) from the module specified
by (H), and stores the information in the device areas specified by (d) and later.
Page 1067
UNIINFRD(P)
UNIINFRDP
Instruction symbol Processing details Reference
S.RTREAD Reads the data set by routing parameters. Page 1072
S(P).RTREAD
SP.RTREAD
Instruction symbol Processing details Reference
S.RTWRITE Registers the routing information to the area specified by a routing parameter. Page 1074
S(P).RTWRITE
SP.RTWRITE
Instruction symbol Processing details Reference
LOGTRG Generates a trigger for trigger logging. Data sampled for the number of records (specified in the
trigger logging setting parameter using the engineering tool) are stored in the data logging file.
Page 1076 LOGTRG
LOGTRGR Resets the trigger condition. Page 1078 LOGTRGR
Instruction symbol Processing details Reference
PSTOP Changes the type of the specified program to standby type. Page 1079 PSTOP(P)
PSTOPP
Instruction symbol Processing details Reference
POFF Turns off the coil of the OUT instruction used in the specified program and changes the type of the
specified program to standby type.
Page 1081 POFF(P)
POFFP
Instruction symbol Processing details Reference
PSCAN Changes the type of the specified program to scan execution type. Page 1083 PSCAN(P)
PSCANP