Mitsubishi Electric MELSEC iQ-R Series - Page 1232

1230
11 PROCESS CONTROL INSTRUCTIONS
11.2 I/O Control Instructions
Processing details
This instruction integrates the input value (E1) in the device specified by (s1), and stores the result in the device specified by
(d1).
HILMT and SUMPTN can be used to specify whether to return SUM1/SUM2 to 0 or hold the HILMT value when BW1/BW2
exceeds HILMT.
e1 and e2 can be used to start or stop integration of E1.
• Operation performed when the integration pattern is set to "Return to 0 when HILMT is exceeded"
• Operation performed when the integration pattern is set to "Hold the HILMT value when HILMT is exceeded"
0
0
e1
e2
HILMT
BW
E1
Reset
Reset
Hold cancel
Reset
StartStart
Hold cancel
Hold cancel
Hold
Hold
When e1 turns off,
e2 also turns off.
Ring counter upper
limit value
Ring counter lower
limit value
0
0
e1
e2
E1
HILMT
BW
Reset
Reset
Reset
Start
Start
Hold cancel
Hold cancel
Hold cancel
Hold
Hold
When e1 turns off,
e2 also turns off.
Ring counter upper
limit value
Ring counter lower
limit value