Mitsubishi Electric MELSEC iQ-R Series - Page 1521

15 NETWORK COMMON INSTRUCTIONS
15.1 Link Dedicated Instructions
1519
15
■Applicable devices
*1 FX and FY cannot be used.
*2 FD cannot be used.
*3 T, ST, C, and FD cannot be used.
The REQ instruction cannot be executed when the target station is ACPU.
■Control data
Operand Bit Word Double word Indirect
specification
Constant Others
X, Y, M, L,
SM, F, B,
SB, FX, FY
J\ T, ST, C, D, W,
SD, SW, FD,
R, ZR, RD
U\G, J\,
U3E\(H)G
Z LT, LST,
LC
LZ K, H E $ J U
(J/U) J(P).REQ          
G(P).RE
Q
         
(s1) 
*2

(s2) 
*2

(d1) 
*2

(d2) 
*1

*3

Operand: (s1)
Device Item Description Setting range Set by
+0 Error completion type
(1) Error completion type (bit 7)
Specify whether to set data when completed with an error.
• 0: Do not set data in (s1)+11 and later at completion with an error.
• 1: Set data in (s1)+11 and later at completion with an error.
0011H
0091H
User
+1 Completion status The completion status is stored upon completion of the instruction.
•0: Normal
• Other than 0: Error (error code)
 System
+2 Own station channel Specify the channel to be used by own station. (Page 1450 Range of available
channel numbers)
1 to 8, 11 to 18 User
+3 Target station CPU type Specify the CPU type of the target station.
• 0000H: Addressed to target station CPU (control CPU)
• 03D0H: Addressed to control system CPU
• 03D1H: Addressed to standby system CPU
• 03D2H: Addressed to system A CPU
• 03D3H: Addressed to system B CPU
• 03E0H: Addressed to multiple CPU No. 1
• 03E1H: Addressed to multiple CPU No. 2
• 03E2H: Addressed to multiple CPU No. 3
• 03E3H: Addressed to multiple CPU No. 4
• 03FFH: Addressed to target station CPU (control CPU)
0000H
03D0H to 03D3H
03E0H to 03E3H
03FFH
User
+4 Target network number Specify the network number of the target station.
• 1 to 239: Network number
1 to 239 User
+5 Target station number Specify the station number of the target station.
(1) Station number specification
[Ethernet or CC-Link IE Controller Network]
• 1 to 120: Station number
[CC-Link IE Field Network]
• 125: Master station
• 126: Master operating station
• 1 to 120: Local station, intelligent device station, submaster station
(2) Group number specification
[Ethernet or CC-Link IE Controller Network]
0081H to 00A0H: All stations with group numbers 0001H to 0020H
(can be specified only for clock data writing)
(3) All-station specification
00FFH: All stations of target network number (broadcast (excluding the own station))
(can be specified only for clock data writing)
1 to 120,
125, 126,
0081H to 00A0H,
00FFH
User
+6 Not used  
b15
00(1)
101
b7 b0b4
………