19 CC-LINK INSTRUCTIONS
19.7 Setting Network Parameters
1663
19
■Slave station setting data
*1 Repeat this setting for the total number of connected modules/stations.
*2 If a local station is specified, specify the intelligent device station.
■Reserved station specification data
*1 For two or more stations occupied, specify only the slave station start number.
Operand: (s2)
Device Item Description Setting range Set by
+0 to +63 Station information
settings
*1
Specifies the station number, the number of occupied stations, and the station type
for each slave station.
The default value range is 0101H to 0140H, meaning that the station number is 1 to
64, the number of occupied stations is 1 station occupied, and the station type is
remote I/O station for Ver. 1.
User
(1) Station number setting
1 to 64
01H to 40H User
(2) Number of occupied stations setting
• 1H: 1 station occupied
• 2H: 2 stations occupied
• 3H: 3 stations occupied
• 4H: 4 stations occupied
1H to 4H User
(3) Station type setting
*2
• 0H: Remote I/O station for Ver. 1
• 1H: Remote device station for Ver. 1
• 2H: Intelligent device station for Ver. 1
• 5H: Single remote device station for Ver. 2
• 6H: Single intelligent device station for Ver. 2
• 8H: Double remote device station for Ver. 2
• 9H: Double intelligent device station for Ver. 2
• BH: Quadruple remote device station for Ver. 2
• BH: Quadruple intelligent device station for Ver. 2
• EH: Octuple remote device station for Ver. 2
• FH: Quadruple intelligent device station for Ver. 2
0H to FH User
Operand: (s3)
Device Item Description Setting range Set by
+0 to +3 Reserved station
specification
Specifies a reserved station in a station-by-station manner.
*1
• 0: Not specified
• 1: Specified
The default value is "0: Not specified" for all stations.
User
b15 b12 b11 b8 b7 b0
(3) (2) (1)
…… …
b15
16
32
48
64
15
31
47
63
14
30
46
62
13
29
45
61
4
20
36
52
3
19
35
51
2
18
34
50
1
17
33
49
b14 b13 b12 b3 b2 b1 b0
(s3)+0
(s3)+1
(s3)+2
(s3)+3
…
…
…
…
…
To Next Page
Loading...
