Mitsubishi Electric MELSEC iQ-R Series - Page 1971

33 TIME DATA TYPE FUNCTIONS
33.4 Division
1969
33
Operation error
• When (s2) is of LREAL data type
Error code
(SD0)
Description
3400H The value input to (s2) is 0. (The value is divided by zero.)
Error code
(SD0)
Description
3402H The value input to (s2) is out of the following range:
-2
1024
<(s2)-2
-1022
, 0, 2
-1022
(s2)<2
1024
(E-1.7976931348623157+308 to E-2.2250738585072014-308, 0, E2.2250738585072014-308 to E1.7976931348623157+308)
3405H The data input to (s2) is out of the range, -2147483648 to 2147483647.