586
7 APPLICATION INSTRUCTIONS
7.5 Data Table Operation Instructions
• These instructions store the data last stored in the table in the device specified by (d) in the device specified by (s). After
execution of the FPOP(P) instruction, the device in which the data read by the instruction has been stored is cleared to 0.
• An interlock mechanism should be used to prevent the FPOP(P) instruction from being executed when the value stored in
the device specified by (d) is 0.
• A number from 0 to 65535 is stored in the number of data (d).
N: Number of data
(1) Filled with 0.
Error code
(SD0)
Description
3405H The FPOP(P) instruction is executed when the value in the device specified by (d) is 0.
(d)+1
(d)+2 (d)+2
(d)+7
(d)+1
(d)+7
(d)
(d)
(s)
1234
5432
7
-1000
0
-4321
1234
5432
6
-1000
0
0
-4321
N
(1)
To Next Page
Loading...
