Mitsubishi Electric MELSEC iQ-R Series - Page 111

5 INSTALLATION AND WIRING
5.4 Mounting Base Unit on the DIN Rail
109
5
■ RQ extension base unit
Use the adapters (larger), adapters (smaller), and stoppers included with the MELSEC-Q series DIN rail adapter for the RQ
extension base unit.
5. Project the tab (4) of the hook B-C on the
upside by pushing up the hook B (3).
6. Hitch the upper part of the base unit to the DIN
rail and push the lower part of the base unit
until it clicks.
7. Fix the stopper of the DIN rail. (Page 111
Fixing of the stopper)
(1) Spot for the hook of the adapter (smaller)
(2) Spot for the hook of the adapter (larger)
1. Insert the hook of the adapter (smaller) into the
lower square hole of two square holes at the
upper part of the base unit and push the upper
part of the adapter until it clicks.
(3)
(4)
(1)
(2)