Mitsubishi Electric MELSEC iQ-R Series - Page 170

168
APPX
Appendix 5 How to Use MELSEC-Q Series Modules
Intelligent communication module
• The SW1VD-AD51HP software package can be used as well as the MELSEC-Q series.
• When the PCRD instruction of the BASIC program is used, there are restrictions on the following processing codes. The
codes other than the following can be used as well as when using the MELSEC-Q series CPU module.
• When the PCWT instruction of the BASIC program is used, there are restrictions on the following processing codes. The
codes other than the following can be used as well as when using the MELSEC-Q series CPU module.
Processing code Restriction
513 (&H201) Not available
515 (&H203) The device range of a MELSEC-Q series CPU module only can be used.
516 (&H204)
533 (&H215) The buffer memory of a MELSEC iQ-R series module cannot be read out.
Processing code Restriction
515 (&H203) The device range of a MELSEC-Q series CPU module only can be used.
516 (&H204)
533 (&H215) Data cannot be written to the buffer memory of a MELSEC iQ-R series module.