56
1 SYSTEM CONFIGURATION
1.3 Applicable Software
1.3 Applicable Software
The following table lists software that can be used for the MELSEC iQ-R series system. (Manual for each software used)
When using a C Controller module, refer to the following.
MELSEC iQ-R C Controller Module User's Manual (Startup)
1.4 Precautions for System Configuration
This section describes precautions for configuring a system.
Precautions when using an extended temperature range base
unit
Pay attention to the following if using the extended temperature range base unit to construct a system compatible with
operating ambient temperature of 0 to 60.
• Only use the extended temperature range base unit. If using a combination with base units other than the extended
temperature range base unit, use in an operating ambient temperature of 0 to 55. ( Page 54 Base unit combination)
• All modules mounted on the extended temperature range base unit offer the same performance as that for an operating
ambient temperature of 0 to 55, and can be used in an operating ambient temperature of 0 to 60.
• Select external devices installed in the same control panel that are compatible with an operating ambient temperature of 0
to 60.
Item Function and application
iQ Works Version 2 A package software integrated the various software such as a programmable controller, motion controller, and
GOT
GX Works3 A software for a system design, programming, debug, and maintenance of a programmable controller
To Next Page
Loading...
