2 ASSIGNMENT FOR MODULES
2.2 I/O Numbers of Modules
69
2
When the CPU module is the RnENCPU, the I/O numbers of the RnENCPU (network part) are automatically assigned as
shown below.
* 1*2
*1 The RnENCPU (network part) occupies I/O numbers of 32 points.
*2 When modules are already placed on the engineering tool, the I/O numbers of empty slots are assigned.
The mounted modules and their I/O numbers can be checked on the "System Monitor" window using the
engineering tool. ( GX Works3 Operating Manual)
CPU01234
00
to
1F
Number of points
I/O number
32
To Next Page
Loading...
