Mitsubishi Electric MELSEC iQ-R Series - Page 24

22
3 POSITIONING CONTROL STARTUP
3.1 Creating a New Project
5. Settings for sequence program parameters
Set the system parameter and each module parameter.
[Creating a module configuration]
1. Select the main base unit, CPU, I/O, and Simple Motion module to be used from the POU list and drag & drop them onto
the "Module Configuration" screen.
2. Select [Edit]  [Parameter]  [Fix] in the menu.
3. When the dialog box appears asking to add module labels for arranged modules, click [OK].
4. Double click on the Simple Motion module to open the "Simple Motion Module Setting Function" screen.
5. Set the parameters, then close the screen when finished.
Drag & drop
1.
2.
3.
4.
5.