4 SYNCHRONOUS CONTROL STARTUP
4.4 Operation Check for Synchronous Control
63
4
3. Operation check for main shaft (input axis)
Check that the servo motors for Axis 1 and Axis 2 start operation.
No. Item Axis 1 Axis 2
1 Md.20: Feed current value
Md.21: Machine feed value
2 Md.26: Axis operating status Synchronous control Positioning control
Md.28: Axis federate 2000.00 [mm/min]
3 Md.30: External input signal: Lower limit ON ON
Md.30: External input signal: Upper limit ON ON
4BUSY ON ON
To Next Page
Loading...
