Mitsubishi Electric MELSEC iQ-R Series - Page 79

2 - 47
2. DETAILS OF MIGRATION FROM Q17nCPUN(-T) TO RnMTCPU
(2) Confirming “Refresh (END)” of MELSOFT GX Works3
1) Select [Parameter] - [System parameter] in the navigation tree to open “System Parameter”
screen. Click on “CPU Buffer Memory Setting: <Detailed Setting>” in [Multiple CPU Setting]
tab.
2) The screen below appears. Click a “Set” button of either CPU No.1 or No.2 in [Refresh (At
the END)].