31
4 PROGRAMMABLE CONTROLLER SETTINGS
4.2 Parameter Settings of Camera Recorder Module
12. Configure the settings for another ONVIF supported network camera in the same way as in steps 5 to 11.
13. Click the [Common Settings] button and configure the settings related to GOT linkage.
• By using the GOT linkage function, the live video of the network camera can be checked and PTZ control
can be performed with the GOT connected to the CPU module in the same network as the network camera.
• GOT linkage requires the FTP server settings in advance.
For details, refer to the following.
Mitsubishi Electric Programmable Controller Camera Recorder Module RD81RC96-CA Sample Screen
Manual (BCN-P5999-1333)
To Next Page
Loading...
