144
5 SAFETY APPLICATION CONFIGURATION EXAMPLES
5.2 System to Which Multiple Safety CPUs are Connected
■Standard remote I/O module
Set the station number setting switches.
The setting value of the station number becomes valid when the module is powered on. Set the station
number when the system is powered off.
Switch number
in the figure
above
Remote I/O
Module number
CCIEF remote (2-2)
R_M2IO2
(Network number 2)
CCIEF remote (3-2)
R_M3IO2
(Network number 3)
CCIEF remote (4-2)
R_M4IO2
(Network number 4)
(1) Station number setting switch 2 2 2
To Next Page
Loading...
