Mitsubishi Electric MELSEC iQ-R Series - Page 166

164
5 SAFETY APPLICATION CONFIGURATION EXAMPLES
5.2 System to Which Multiple Safety CPUs are Connected
■Basic settings
Set the network configuration settings and other parameters of the CC-Link IE Field Network master/local module. Display the
basic settings. Then, select and input parameters as shown below. Complete the input. Then, click the [Apply] button in the
lower right of the window. When setting "Network Configuration Settings", double-click the line of the network configuration
setting in the setting item window, or click the right-side button to be displayed when selecting the line.
Window
Displayed items
Setting classifications CCIEF programmable
controller
Master (1-0)
CCIEF programmable
controller
Local (1-1)
CCIEF programmable
controller
Local (1-2)
Basic Settings Network Configuration Settings Refer to Network Configuration
Settings.
(Unavailable) (Unavailable)
Refresh Settings Do not set. Do not set. Do not set.
Network Topology Line topology, star topology, or both
are used
(Unavailable) (Unavailable)
Operation setting when the
master station is returned
(settable only when setting the
submaster station in a network
configuration)
Return as Master Operation Station (Unavailable) (Unavailable)