66
5 SAFETY APPLICATION CONFIGURATION EXAMPLES
5.1 System Configured by a Safety CPU
■Supplementary cyclic settings
Set link scan mode, station-based block data assurance, and input/output hold clear setting.
1. Select and input parameters as shown below.
2. Click the [Apply] button and complete "Supplementary Cyclic Settings".
Item Range/value
Link scan mode Sequence scan asynchronous
Constant link scan time (Unavailable)
Station-based block data assurance Enable
Output Hold/Clear Setting during CPU STOP Clear
Data Link Error Station Setting Clear
Output Mode upon CPU Error Clear
To Next Page
Loading...
