Mitsubishi Electric MELSEC iQ-R Series - Page 18

16
1 COMMON ITEMS
1.3 MELSEC iQ-R Series Data Link Functions
*1 For Q12DCCPU-V, it is categorized as the device type for Q bus interface.
*2 The devices cannot be used for the mdrDevRst/mdrDevSet/mdrRandR/mdrRandW functions.
*3 Even if a non-existent device is specified in the mdrRandR function, the function may end normally.
(All of the bits turn ON in read data. For word devices, the read data is '-1'.)
*4 "": indicates a network number.
*5 Only the mdrRandRLabel/mdrRandWLabel function can be used.
Link direct device
*3,*4
Argument value of device name (1 to 255):
Network number
Link input (J\X) 1001 to 1255 3E9H to 4E7H DevLX(1) to
DevLX(255)
Link output (J\Y) 2001 to 2255 7D1H to 8CFH DevLY(1) to
DevLY(255)
Link relay (J\B) 23001 to 23255 59D9H to 5AD7H DevLB(1) to
DevLB(255)
Link register (J\W) 24001 to 24255 5DC1H to 5EBFH DevLW(1) to
DevLW(255)
Link special relay (J\SB) 25001 to 25255 61A9H to 62A7H DevLSB(1) to
DevLSB(255)
Link special register (J\SW) 28001 to 28255 6D61H to 6E5FH DevLSW(1) to
DevLSW(255)
Intelligent function module device, module access device
*3
Argument value of device name (0 to 255): Start I/O number  16.
29000 to 29255 7148H to 7247H DevSPG(0) to
DevSPG(255)
Device name (Device) Device type
Code Device name
Decimal Hexadecimal