48
3 DETAILS OF FUNCTION
3.1 C Intelligent Function Module Dedicated Functions
■ Description
• This function sets data to be sampled in each sequence scan according to the storage destination for data set in the data
sampling in each sequence scan setting (plSetData).
• When executing the CITL_SetCollectData function multiple times, the last executed setting is enabled.
• This function sets data to be sampled in each sequence scan only. To start data sampling in each sequence scan, execute
the CITL_StartCollectData function.
Setting is applied only when it ends normally.
■ Return value
■ Relevant function
Page 32 CITL_GetCollectData
Page 52 CITL_StartCollectData
Page 54 CITL_StopCollectData
Page 61 CITL_WaitCollectDataRecvEvent
Return value Description
0 (0000H) Normal
Other than 0 (0000H) Error
For details on the error, refer to the following chapter.
Page 108 ERROR CODE LIST
To Next Page
Loading...
