Mitsubishi Electric MELSEC iQ-R Series - Setting RUN-PAUSE Contacts

222
16 REMOTE OPERATION
16.3 Setting RUN-PAUSE Contacts
16.3 Setting RUN-PAUSE Contacts
RUN-PAUSE contacts can be set. RUN-PAUSE contacts are used to perform remote RUN or STOP, or remote PAUSE using
a contact.
[CPU Parameter]  [Operation Related Setting]  [RUN-PAUSE Contact Setting]
Window
Displayed items
When setting the PAUSE contact, be sure to also set the RUN contact. (The PAUSE contact cannot be set
alone.)
Item Description Setting range Default
RUN Set the contact that controls RUN for the CPU module. X0 to X2FFF 
PAUSE Set the contact that controls PAUSE for the CPU module. X0 to X2FFF 