APPX
Appendix 4 List of Special Relay Areas
667
A
*1 There are restrictions on the firmware version of the CPU module and software version of the engineering tool. ( Page 747 Added
and Enhanced Functions)
*2 Page 731 Waiting time for cyclic data receive after system switching (Twcyc)
*3 The type of the error can be set in the RAS setting of CPU parameters. (Set "Operation Error" of "CPU Module Operation Setting at
Error Detected" to "Stop" or "Continue".)
SM1762 Operation setting for
access from the
standby system to
the extension base
unit
*1
Off: Error
*3
On: Non-processing
Whether the following operation is handled as an error
or not is specified: The execution of an instruction for
accessing the buffer memory of a module on an
extension base unit from the standby system.
U
No. Name Data stored Details Set by (setting
timing)
To Next Page
Loading...
