106
1 FUNCTIONS
1.1 BACnet Object Function
Settings to perform a scheduled operation
To perform a scheduled operation, set the following properties.
• To set a Schedule object using another BACnet device
Set a scheduled operation to each property and send a WriteProperty(Multiple) service.
■ Setting ListOfObjectPropertyReferences property
Set the object which is controlled by a Schedule object and its properties.
1. Select [BACnetObject] to open the "BACnet Objects" screen.
2. Click the [Browse] button of "Schedule".
Property Description
ListOfObjectPropertyReferences Refer to the following section.
Page 106 Setting ListOfObjectPropertyReferences property
WeeklySchedule Refer to the following section.
Page 108 Setting WeeklySchedule property
ExceptionSchedule Refer to the following section.
Page 110 Setting ExceptionSchedule property
Schedule_Default Set the default value which is output when the date of a schedule is changed (0:00).
ScheduleExpand Set this property only when "BACnet Standard Applied" selected in [Settings] [Basic Information] is IEIEJ-P-
0003:2000 Addendum-a.
By setting this property to "True", a scheduled operation is performed in accordance with the specification of
the Institute of Electrical Installation Engineers of Japan. (Page 271 ScheduleExpand)
To Next Page
Loading...
