218
1 FUNCTIONS
1.12 Configuration Function
Who-Is Transmission Info.
With the Who-Is send setting, set a send target BACnet device where Who-Is services are to be sent from a BACnet module
periodically.
The send target BACnet device of Who-Is services can be specified with any of the following methods.
Page 218 Specifying a device using a web browser
Page 219 Specifying devices from a CSV file in a batch
■ Specifying a device using a web browser
1. Select [Settings] [Who-Is Transmission Info.], and click the [Add] button on the "Who-Is address" screen.
2. Set the minimum instance number to "LowDeviceInstanceNo" and the maximum instance number to
"HighDeviceInstanceNo" among the send target BACnet devices of Who-Is services.
To Next Page
Loading...
