3 TROUBLESHOOTING
3.4 Error Code List for BACnet Request Function/BACnet Monitoring Function
237
3
When an error code is output to a STATUS, the error description is displayed with a configuration function.
For the display method of error descriptions for the read function, refer to the following section.
Page 190 Read
For the display method of error descriptions for the write function, refer to the following section.
Page 191 Write
For the display method of error descriptions for the BACnet monitoring function, refer to the following section.
Page 192 BACnetMonitor
Error code Appearance on the screen
0OK
2 Error[Error factor]
3 Reject[Reject factor]
4 Abort[Abort factor]
5 RetryOver
6 NoOperational
8 ErrorOther
13 NoDevice
15 Unknown Network
16 APDUSizeOver
17 SegmentCountOver
To Next Page
Loading...
