Mitsubishi Electric MELSEC iQ-R02CPU - Module Information List

3 TROUBLESHOOTING
3.2 Checking the Module Status
283
3
Module Information List
Switch to the [Module Information List] tab to check various status information of the Ethernet-equipped module. (The
displayed items vary depending on the module.)
*1 This item is displayed when the network type is set to "Ethernet".
For when the network type is set to "CC-Link IE Control", refer to the following.
 MELSEC iQ-R CC-Link IE Controller Network User's Manual (Application)
For when the network type is set to "CC-Link IE Field", refer to the following.
 MELSEC iQ-R CC-Link IE Field Network User's Manual (Application)
Item Description
LED information Displays the LED status of the Ethernet-equipped module.
Individual information (P1:
Ethernet)
*1
Network Number Displays the network number set for the selected module.
Station Number Displays the station number set for the selected module.
Transient transmission group No. Displays the transient transmission group number set for the selected module.
Send Frame Displays the send frame setting set for the selected module.
Jumbo Frame Displays the jumbo frame setting set for the selected module.
Communication speed setting Displays the communication mode set for the selected module.
IP address (1st octet) to IP address
(4th octet)
Displays the IP address set for the selected module.
Control system IP address (1st octet)
to Control system IP address (4th
octet)
Displays the control system IP address set for the selected module.
MAC address (1st octet) to MAC
address (6th octet)
Displays the MAC address of the selected module.
Individual information (P2: Ethernet)
*1
(Same as the P1 connector)