APPX
Appendix 3 Buffer Memory
373
A
■Simple CPU communication error code for each setting number (Un\G1194 to Un\G1257)
■Execution interval (current value) for each setting number (Un\G1258 to Un\G1321)
Address Name Description
Un\G1194 Simple CPU communication error code setting No.1 The cause of the error detected in the simple CPU
communication is stored.
0: No error (function not used)
Other than 0: Error code (Page 310 List of Error Codes)
The value is cleared to 0 with a clear request from the
engineering tool.
Un\G1195 Simple CPU communication error code setting No.2
Un\G1256 Simple CPU communication error code setting No.63
Un\G1257 Simple CPU communication error code setting No.64
Address Name Description
Un\G1258 Execution interval (current value) setting No.1 If "Fixed" is set for communication setting, the current value of
the execution interval is stored.
0: Unset (function not used), communications impossible
Other than 0: Execution interval (unit: ms)
Un\G1259 Execution interval (current value) setting No.2
Un\G1320 Execution interval (current value) setting No.63
Un\G1321 Execution interval (current value) setting No.64
To Next Page
Loading...
