1 FUNCTIONS
1.3 Communications Using the Predefined Protocol
49
1
■When protocol setting data is normal
■When protocol setting data is abnormal
When executing UINI instruction
When the RJ71EN71 network type is set to "Q Compatible Ethernet" and the UINI instruction is executed, the protocol setting
data will not be checked.
Predefined protocol ready maintains the state before the UINI instruction was executed.
Ethernet-equipped module
'Predefined protocol ready'
(Un\G1901002.0)
'Predefined protocol setting
data check area'
(Un\G1901020 to Un\G1901047)
Checking the protocol
setting data
Bit 0 turns on when the
check result is normal.
Power on/reset
The number of registered protocols and information
about whether protocols have been registered are stored.
Normal result
Ethernet-equipped module
'Predefined protocol ready'
(Un\G1901002.0)
'Predefined protocol setting
data check area'
(Un\G1901020 to Un\G1901047)
Checking the protocol
setting data
Power on/reset
The error details are stored.
Abnormal result
Bit 0 remains off.
To Next Page
Loading...
